manualshive.com logo in svg

Borger Classic FL 1036, Operating Manual, Page: 64 / 204

Share
Download
Borger Classic FL 1036 Operating Manual Download Page 64

Personnel:

n

Mechanics

Protective equip-
ment:

n

Occupational safety clothing, chemical
resistant

n

Safety shoes

n

Safety gloves, chemical-resistant

n

Safety goggles

Special tool:

n

Tools, general

n

Hammer drill

n

Torque wrench

— Read and follow the safety instructions detailed in 

Ä

 Chapter

2.12 “Safety instructions for maintenance and rectifying mal-
functions” on page 30

.

— To the extent necessary, amply secure the surrounding area

when performing installation. Cordon off the working area with
a red and white safety chain and a warning sign.

1.

Base frame

Attach the Börger machine to a solid, rigid surface.

2.

Drive

Connect the Börger machine which is installed on a Börger
base frame or a suitable rigid surface to a suitable drive.

Observe the appropriate speed and sufficient torque, and
take all necessary parameters into account, such as viscosity
and the solid content of the medium.

3.

Attach a suitable cover (coupling guard) for the rotating parts.

Transportation, Storage and Installation

BA-Classic FL_en-US, 03.05.2018

www.boerger.de / www.boerger.com

64

Summary of Contents for Classic FL 1036













































































































































































































Reviews:

No comments