BEI JING BOREY TECH CO., LTD Website:www.en.boreytech.com
Figure 1
3.1.Edit the smallest unit component
Firstly observe PCB’ structure,mainly same groups of components amount,and find
smallest unit like figure 2,then save every component in the unit.On figure 2 there are 3
light beads and 1 resistor.Please save them separately.
Figure 2
3.2.First-level array setting
Take Figure 1 for example,there are 32 units on jointed boards,smallest unit is the three
lights and one resistor at the lower-left corner(Figure 2),we have finished save by above
step.Now observe the array of this board(Figure 3),Xdirection has 4 same units,Y direction
has 8 sameunits.So we set 4 in X and 8 in Y in first-level array,then OK to save.
