BEI JING BOREY TECH CO., LTD Website:www.en.boreytech.com
Figure 6
Take Figure 6 for example,we have programmed small unit which is at bottom of left
corner,then use first-level array,it is 1 in X direction and 8 in Y;Program left units to an
array,(it is only 1 in X,so basic points on first board and end board are in a vertical line,in
fact they are still diagonal),then observe the amount of array which are same with X ones on
board,it is 4 like Figure 6,so please set 4 in second-level array,then OK to save.
Notice:Please don’t move X and Y axis after saving basic ppoint of end board in first-level
array,or there will be deviation from basic point of first board in second array.
3.5 Set basic point of sencond array
Figure 7
