BEI JING BOREY TECH CO., LTD Website:www.en.boreytech.com
Figure3
3.3 Set basic point of First-level array
By position first board and end board and calculate placing location,basic point seeting of
first-level array can be finished.First board and end board they are same point in two
diagonal units in first-level array,as Figure4:
Figure 4
Put selection cursor on the position of basic point in first board by nozzle’s rotating
button,then align camera with last component on first unit,press OK to save;(Way:after
setting smallest component,please don’t move XY,the camera will be on the last point,then
switch to page 3,save first point together.)Then put selection cursor on the position of basic
