76
9
Electrical section
Important
The cooker must be installed in accordance with the
manufacturer’s instructions. Incorrect installation, for which the
manufacturer accepts no responsibility, may cause injury to
persons or animals etc.
General
*
Connection to the mains must be carried out by qualified personnel in
accordance with current regulations.
*
The appliance must be connected to the mains checking that the
voltage corresponds to the value given in the rating plate and that the
electrical cable sections can withstand the load specified on the plate.
*
The plug must be connected to an earthed socket in compliance with
safety standards.
*
The appliance can be connected directly to the mains placing an
omnipolar switch with minimum opening between the contacts of 3
mm between the appliance and the mains.
*
The power supply cable must not touch the hot parts and must be
positioned so that it does not exceed 75°C at any point.
*
Once the appliance has been installed, the switch or socket must
always be accessible.
N.B.
For connection to the mains, do not use adapters, reducers or
brancing devices as they can cause overheating and burning.
If the installation requires alterations to the domestic electrical system or
if the socket and appliance plug are incompatible, call an expert.
He should also check that the socket cable section is suitable for the
power absorbed by the appliance.
EN
Bor
etti Milano / User guide - Installation advice
Summary of Contents for MFBG 901 AN BE
