48
Replacing the oven lamp
Warning
Ensure the appliance is switched off and disconnected from
the electrical power supply before replacing the lamp to avoid
the possibility of electric shock.
*
Let the oven cavity and the heating elements to cool down.
*
Switch off the electrical supply.
*
Remove the protective cover “A” (fig. 7.14b).
*
Replace the halogen lamp “C” with a new one suitable for high
temperatures (300°C) having the following specifications: 230V,
50 Hz and same power (check watt power as stamped in the lamp
itself) of the replaced lamp.
*
Refit the protective cover.
Important warning
Never replace the bulb with bare hands; contamination from
your fingers can cause premature failure. Always use a clean
cloth or gloves.
Note
Oven lamp replacement is not covered by your guarantee.
EN
Bor
etti Milano / User guide - Installation advice
Summary of Contents for MFBG 901 AN BE
