Page 4
3B-390977NU – 01/17
BONNET GRANDE CUISINE
Rue des Frères Lumière - Z.I Mitry Compans
77292 MITRY MORY Cedex
8.2
MANUAL MENU
8.2.1 GENERAL
3 cooking modes: Convection, Steam and Combined (from 0 to 100%)
Display of actual and set temperature
Preheat activation
Time / Core temperature display
Select Time / Probe temperature
Ventilation speed (1 to 100%)
Vent outlet
Manual humidification
Rapid cooling & Holding mode (hot cupboard)
Cleaning Programme, HACCP activation, Data exchange
Modification and creation of programmes
Installation parameters / operating / technical
Access and Validation of programmes
START / STOP cooking button. Changing colour:
Temperature zone
Displays the ambient and set temperatures
The ambient temperature is adjustable by pressing the corresponding zone
The setting entered is validated after 5 seconds or by pressing on another zone/button
Adjustment can be made using the coder or with the
/
buttons in 1° intervals
Timer zone
Displays the “running time” or “remaining time”.
The time is adjustable by pressing the corresponding zone
The setting entered is validated after 5 seconds or by pressing on another zone/button
Adjustment can be made using the coder or with the
/
buttons in 1 minute intervals
/
The location of the white dots at the side of the timer logo indicates what is displayed:
Dots on the left: remaining time
Dots on the right: running time
Core temperature button
Pressing this touch button switches automatically from time control to core temperature
control zone
The core temperature zone is adjusted by touching the corresponding zone
The setting entered is validated after 5 seconds or by pressing on another zone/button
Adjustment can be made using the coder or with the
/
buttons in 1° intervals
To return to Timer mode (timer zone) touch the button again opposite the display
Fan button
Pressing this button allows you to change the fan speed (default is 100%) moving to
speed adjustment mode
Adjustments can be made using the coder in 10% steps or using the
/
buttons in
1% increments.
The setting is validated after 5 seconds or by touching another zone/button
