Page 9
3B-390977NU – 01/17
BONNET GRANDE CUISINE
Rue des Frères Lumière - Z.I Mitry Compans
77292 MITRY MORY Cedex
The cleaning cycle will start automatically and last 17 minutes.
The display indicates time remaining.
- At the end of the cycle the display indicates « End ». The time display indicates « 00 00 » and the buzzer sounds ( 5 times).
6.4.2 USING THE AUTOMATIC CLEANING CYCLE (AUTOMATIC WASH OPTION)
Procedure:
- Switch the oven on.
- Wait a few seconds until the start screen clears.
- Press the button:
"Cleaning mode"
- Select the required level of cleaning depending on how dirty the oven is.
Select cleaning intensity of 1 to 3
- Check the pipe is connected to the chemical container and that the quantity is sufficient. If not refer to the paragraph “Replacing the
chemical containers”
- Then press the “Start” button:
"Start" a cleaning cycle.
- It is still possible to change the intensity of the cleaning cycle whilst the zone is flashing (phase before detergent is injected). Whilst
the timer is still displayed:
Time remaining before the end of the cycle.
- At the end of the cycle the display indicates "00 00".
6.4.3 STOPPING THE CLEANING CYCLE
To stop a cleaning cycle that is running:
- Press the stop button:
"STOP" stops the cycle
.
If this action is not validated the cycle is paused but not stopped (It will restart after a few seconds if no further action is taken).
Pressing the button for a second time will restart the cleaning cycle
- Confirm by validating using “End?”.
"End?" Stops the cleaning cycle.
Depending on the progress of the cleaning cycle, it will be immediately stopped or will go directly to rinsing before stopping.
