bonitron M3460UC, Customer Reference Manual

Page: 24 / 56

M3460
24
4.5.1. S
TATUS
S
CREEN
Upon system start, after a set period of inactivity, or during certain events, the
system transitions to the Status screen. The status screen displays the
present ride-thru and charger state, and two system voltages or currents. The
variables displayed will be those selected by the user in the Configuration
menu. Each value is indicated by both a number and a bar graph.
Left : Analog screen
Right : Fault screen
Enter : Main menu
4.5.2. F
AULT
S
CREEN
If a fault occurs, the red LED will turn on, and the display will transition to the
Fault screen. If more than one fault is detected, the screen will scroll through
all the faults at two-second intervals. Pressing
up or down allows for faster
manual scrolling through the faults. Pressing left and right simultaneously will
clear any resettable faults.
Up : Show previous fault
Down : Show next fault
Left : Status screen
Right : Analog screen
Left & Right : Clear faults
Enter : Main menu
Cancel : Status screen
4.5.3. A
NALOG
S
CREEN
This screen displays the present values of four of the eight system voltages
and currents. One set shows storage voltage, storage current, output voltage,
and output current; the other set shows the AC phase voltages and the
charging current (not shown if charger is not connected). Which set is
displayed can be changed by pressing
up or down . Each value is indicated
by both a number and a bar graph.
Up/Down : Switch analog set displayed
Left : Fault screen
Right : Status screen
Enter : Main menu
Cancel : Status screen
4.5.4. M
AIN
M
ENU
From this screen, the user may select viewing records, executing actions, or
configuring the display system. This screen also displays the software version
for the 3660I4 and 3660D5 boards.
Up/Down : Move cursor
Enter : Make selection
Cancel : Main menu