M3460
28
the ride-thru to prevent damage to the storage bank. If capacitors are used,
the system will start-up with this fault, but can be reset after the capacitor
bank is charged above the Storage Undervoltage level.
4.6.3. S
TORAGE
O
VERVOLTAGE
This fault indicates that the storage voltage has risen above the level set in
the Super menu. There are two overvoltage fault levels, one for normal
operation, and one for when the charger is executing an equalize cycle.
4.6.4. R
IDE
-T
HRU
N
OT
R
EADY
This fault indicates that the ride-thru is not ready to run.
4.6.5. P
RECHARGE
N
OT
C
OMPLETE
This fault indicates that the ride-thru has not successfully completed
precharge.
4.6.6. R
IDE
-T
HRU
O
VERTEMP
This fault indicates that the ride-thru temperature has reached an unsafe
level.
4.6.7. P
HASE
L
OSS
This fault indicates that the listed phase has dropped below a preset level for
longer than the time set in the Super menu. This is probably due to a blown
fuse or incorrect wiring.
4.6.8. R
IDE
-T
HRU
A
CTIVE
T
IME
This fault indicates that the ride-thru has remained active for longer than the
maximum safe time as set in the Super menu.
4.6.9. S
TORAGE
I
MBALANCE
This fault indicates that the voltage on one of the individual storage modules
has risen to an unsafe level.
4.6.10. S
TORAGE
O
VERTEMP
This fault indicates that one of the individual storage modules has exceeded
its safe temperature limit.
4.6.11. C
HARGER
F
AULT
This fault indicates that the charger has reported some problem preventing it
from continuing to operate.
4.6.12. D
ISCHARGE
R
ESISTOR
O
VERTEMP
This fault indicates that the discharge resistor has exceeded its safe
temperature limit.
4.6.13. D
ISPLAY
C
OMMUNICATION
L
OSS
This fault indicates that the 3660D5 display board has lost communication
with the 3660I4 interface board, probably due to a loose wire or cable.
4.6.14. I
NTERFACE
C
OMMUNICATION
L
OSS
This fault indicates that the 3660I4 interface board has lost communication
with the 3660D5 display board, probably due to a loose wire or cable.
Summary of Contents for M3460UC
