36
10
7
8
9
M
High Precision DIGITAL INDICATOR
M
High Precision DIGITAL INDICATOR
M
High Precision DIGITAL INDICATOR
M
High Precision DIGITAL INDICATOR
It
moves onto next stage
after saving selected item
when pushing No.4 key after
the
relay operation
mode
change.
ex)
r1.
H
on
(a contact)
You can also set the L2 Hi
relay in the same way.
After setting is completed,
press No.1 key Change to
weighing mode.
Set
rLY2(L2), rLY3(L3)
in the
same way.
When setting the relay output
value, if the Low value is set
higher than the Hi value,
Err1
is displayed.
Relay setting has been
completed and setting value
is saved.
It turns into measurement mode status.
Entry to setting mode is unavailable under key lock status thus it shall be executed after canceling the key lock.
Setting range display may differ based on location of decimal point.
Although meter display unit is 6 digit, Lo and Hi display unit is 5 digit. Therefore, no display is available for setting
value of 6 digit. (minus value setting up to ‐19999 is available)
Relay setting value can be initialized at check mode.
You can exit measurement mode when set Lo only and push No.1 key (M).
OK setting and output are operated within Lo and Hi setting value range.
(OK setting is not conducted separately)
