35
1
2
3
4
5
6
M
M
M
High Precision DIGITAL INDICATOR
M
High Precision DIGITAL INDICATOR
M
High Precision DIGITAL INDICATOR
M
High Precision DIGITAL INDICATOR
M
High Precision DIGITAL INDICATOR
M
High Precision DIGITAL INDICATOR
9. Relay Mode
Relay operation mode shall be selected from function.
Relay output shall be conducted from output terminal L1(LO), L2(OK), and L3(HI) or rear panel.
9-1 Relay Mode
9-1-1 Relay set up method – rLY1(L1), rLY2(L2), rLY3(L3)
1.
It turns into the mode selection status when key is pushed while pushing key is
pushed at measurement status.
2.
If you press the key in the mode selection state, the currently set relay value is displayed.
3.
Relay setting value can be changed by using key or key.
4.
After changing the relay setting value, press the key to save and proceed to the next step.
5.
Push key to cancel the setting and return to measurement mode for mode cancellation.
At the mode cancelation, the setting until previous stage of cancellation is saved.
It is entered into relay
setting value change mode
when pushing No.3 key
while pushing No.1 key.
It proceeds with relay L1 Hi
value setting stage when
pushing No.4 key.
When pushing No.4 key after
changing L1 Hi relay setting
value with the use of No.2
and No.3 key, it moves onto
next stage.
ex) 1.000kg
It proceeds with relay L1 Low
value setting stage when
pushing No.4 key.
When pushing No.4 key after
changing L1 Low relay setting
value with the use of No.2
and No.3 key, it moves onto
next stage.
ex) 1.000kg
Relay operation mode
changed by pushing either
No.2 or No.3 key.
r1.
L
on
(b contact),
r1.
r
on
(range contact),
r1.
H
on
(a contact)
Three types of settings are possible.
