Bomar Ergonomic 320.250 GAC, Operating Instruction

Page: 14 / 143

14
Manual version: 1.02 / Mar. 2010
Manual rev.: 1
B
e
z
p
e
č
n
o
s
tn
í
p
o
k
y
n
y
S
ic
h
e
rh
e
it
s
h
in
w
e
is
e
S
a
fe
ty
n
o
te
s
1.5.3. Saw band cover
This protective cover envelops the saw band in the area from guiding cube to
the arm.
Never switch the saw band on if this cover is not mounted!
1.5.4. Feeding vice cover
The cover avoids the service workers in entrance to the feeding vice during
operation. The service workers are protected before injury.
If the cover is opened during cutting, the limit switch is unfastened (see arrow),
the machine is stopped. The band saw is not possible start in set mode.
The band saw is stated to the operation, when the cover is closed!
1.5.5. Saw band stretching and rupture inspection
This device checks the saw band tension and causes immediate machine stop
if the band incidentally ruptures.
The device includes a limit switch. Its adjustment is described in chapter
„Servicing and adjusting“. Check the switch carefully and periodically – adjust it
if necessary.