Bomag BW 100 AD-5, Operating & Maintenance Instructions

Page: 153 / 212

4. Thoroughly clean the outside of the oil filter
cartridge.
5. Unscrew the oil filter cartridge using an
appropriate strap wrench.
6. Remove any dirt from the sealing face of
the filter carrier.
7. Thinly apply oil to the rubber seal of the
new oil filter cartridge.
8. Screw on the oil filter cartridge and tighten
by hand.
9. Fill in fresh engine oil through the filler
opening (2).
10. After a short test run check the oil level on
the oil dipstick (1), if necessary top up to
the “MAX” mark.
11. Check oil filter cartridge and drain plug for
leaks.
12. Dispose of the oil and filters in line with
environmental regulations.
8.8.2 Checking, tensioning the V-belt
8.8.2.1 Checking the V-belt
Protective equip-
ment:
n Working clothes
n Protective gloves
1. Park the machine in secured condition
Ä
Chapter 6.7 „Parking the machine in
secured condition“ on page 113 .
2. Allow the engine to cool down.
B-880-0108
Fig. 121
MIN
MAX
2
1
B-880-0083
Fig. 122
Maintenance – Every 250 operating hours
BW 100 AD-5 153