Bomag BW 100 AD-5, Operating & Maintenance Instructions

Page: 102 / 212

2. Turn the ignition key to position “I”.
ð
All control and warning lights in the
instrument cluster light up for a moment.
3. With cold ambient temperatures hold the
ignition key up to 10 seconds in position
“II”.
ð
The preheating control light lights up.
4.
The starter switch is designed
with a re-start lock. The ignition
key must first be turned back to
position “0” before a new
starting attempt can be made.
NOTICE!
Components may get dam-
aged!
– Run the starting process for
maximum 20 seconds
without interruption and
pause for a minute between
starting attempts.
– If the engine has not started
after two attempts, determine
the cause.
Turn the ignition key through position “II” to
position “III”.
ð
The starter cranks the engine.
B-ELE-0070
Fig. 69
B-SYM-0010
Fig. 70
B-ELE-0072
Fig. 71
Operation – Starting the engine
BW 100 AD-5 102