Bomag BW 100 AD-5, Operating & Maintenance Instructions

Page: 165 / 212

1. Check valve clearance (A) between rocker
arm and valve with a feeler gauge. The
feeler gauge must fit through the gap with
little resistance.
2. If the gap is too narrow or too wide for the
feeler gauge, adjust the valve clearance.
8.10.2 Checking the engine mounts
Protective equip-
ment:
n Working clothes
n Protective gloves
1. Park the machine in secured condition
Ä
Chapter 6.7 „Parking the machine in
secured condition“ on page 113 .
2. Allow the engine to cool down.
3. Check air intake and exhaust manifold fas-
tenings for tight fit.
4. Check sockets and clamps between air
filter, exhaust turbocharger and charge air
line as well as the engine oil lines for tight
fit and leaks.
5. Check fastening screws on the engine oil
sump and engine mounts for tight fit.
6. Check condition and tight fit of engine
pillow blocks.
8.10.3 Checking the ROPS
All bolted connections must comply with the
specifications and should be absolutely tight
(observe the tightening torques).
Screw and nuts must not be damaged, bent or
deformed.
Fig. 137
Maintenance – Every 1000 operating hours
BW 100 AD-5 165