Bomag BW 100 AD-5, Operating & Maintenance Instructions

Page: 44 / 212

3.7 Driving the machine; working operation
3.7.1 Persons in the danger area
Before taking up work, also after breaks, you
should always convince yourself that the
danger zone is free of persons or obstructions,
especially when driving in reverse.
Give warning signals, if necessary. Stop work
immediately if persons remain in the danger
zone, despite the warning.
Do not step or stand in the articulation area of
the machine when the engine is running.
3.7.2 Driving the machine
Always wear the seat belt when driving.
Do not drive on bases with insufficient load
bearing capacity.
Do not drive on ice and snow.
If the machine has contacted high-voltage
power lines:
n
do not leave the operator’s stand,
n warn others from coming close to or
touching the machine,
n
if possible drive the machine out of the
danger zone,
n have the power switched off.
Operate the machine only from the operator’s
platform.
Do not adjust the driver’s seat while driving.
Do not climb onto or off the machine while the
machine is driving.
Do not use the machine to transport persons.
In case of unusual noises and development of
smoke perform trouble shooting and have the
fault corrected.
Concerning your safety – Driving the machine; working operation
BW 100 AD-5 44