9
In this example:
•
The 'Video Rx' channel on the Bolin-Decoder-D10H receiver is subscribed to the 'Video Tx' channel on
the Bolin-PTZ-Camera-D220 transmitter.
This subscription would cause video from the Bolin-PTZ-Camera-D220 to be displayed on the front of
house display screen.
•
The 'Left' and 'Right' audio channels on the Bolin-Decoder-D10H audio receiver are subscribed to the
'Left' and 'Right' Tx channels on the AVIO USB audio transmitter.
These subscriptions would cause the left and right audio channels from the AVIO USB audio
transmitter to be output via the HDMI of decoder.
•
The 'Left' and 'Right' audio channels on the AVIO USB audio receiver are subscribed to the 'Left' and
'Right' Tx channels on the Bolin-PTZ-Camera-D220 audio transmitter.
These subscriptions would cause the left and right audio channels from the Bolin-PTZ-Camera-D220
audio transmitter to be output via the USB of AVIO.
•
The 'RS-422' ancillary channel on the Bolin-PTZ-Camera-D220 receiver is subscribed to the equivalent
channels on the Bolin-Decoder-D10H transmitter.
These subscriptions would enable serial control RS-422 on the transmitter (decoder) via the Serial control
ports RS-422 on the receiver (camera).
•
The 'RS-422' ancillary channel on the Bolin-Decoder-D10H receiver is subscribed to the equivalent
channels on the Bolin-PTZ-Camera-D220 transmitter.
These subscriptions would enable serial control RS-422 on the transmitter (camera) via the Serial control
ports RS-422 on the receiver (decoder).
•
The 'IR' ancillary channels on Bolin-PTZ-Camera-D220 receiver are subscribed to the equivalent
channels on the Bolin-Decoder-D10H transmitter.
These subscriptions would enable infrared control of the transmitter (decoder) via the control ports on
the receiver (camera). This is only for the case when you use IR (TX/RX) jumper for camera IR
control.
•
It is not needed to use IR subscription when you use Bolin Dante AV camera and Bolin Dante AV
decoder.
Routing View
When Dante Controller is started, it always displays the Routing Tab within the Network View. In this view the
network is shown in the form of a grid. Devices with Tx channels are displayed along the top row of the grid, and
those with Rx channels are displayed along the left-hand column of the grid. Initially a collapsed view is
presented; individual channels cannot be seen.
automa
Note:
If a device name is shown in red, it means Dante Controller has automatically detected an error condition. Double-
click the device name to see more information. Refer to Automatic Notification of Device Errors for further
explanation.
Note:
Bolin Dante AV camera and decoder has both Tx and Rx channels, it is shown along the top row of the grid and
along the left-hand edge.
Device Info
The Device Info tab provides a network-wide overview of device configuration and operating information.
The tabular view presents the following information, in columns from the left:
•
Device Name
: The device name currently associated with the device
•
Model Name
: The model name of the device
•
Product Version
: The product version assigned by the manufacturer (Bolin)