11
Device Name
The device name currently associated with the device.
Subscription Status
The icon in the Subscription Status column displays a summary of subscription states for the device. If
any of the device's channels are not successfully subscribed, the relevant icon will be displayed here.
Primary Status
The Primary Status column indicates the link speed of the primary Dante network interface for the
device.
Secondary Status
The Secondary Status column indicates the link speed and status of the secondary Dante network interface
for the device (if applicable). 'N/A' indicates that the device does not have a secondary interface. 'Link
Down' indicates that the device has a secondary interface, but it is not currently connected.
Bandwidth Columns
Use the bandwidth columns to see an approximation of transmit and receive traffic over individual
device interfaces.
■
Primary Tx B/W
The Primary Tx B/W column displays an approximation of the current transmit bandwidth on the
primary Dante network interface for the device.
■
Secondary Tx B/W
The Secondary Tx B/W column displays an approximation of the current transmit bandwidth on
the secondary Dante network interface for the device.
■
Primary Rx B/W
The Primary Rx B/W column displays an approximation of the current receive bandwidth on the
primary Dante network interface for the device.
■
Secondary Rx B/W
The Secondary Rx B/W column displays an approximation of the current receive bandwidth on
the secondary Dante network interface for the device.
Latency Setting
Shows the current latency setting for the device.
Note:
For video (Dante AV) devices, the latency setting applies only to the audio channels.
Latency Errors
The Latency Errors column displays icons representing the recent latency performance of the device.
A green light indicates that the device is subscribed, and there are no latency problems - i.e.
all audio packets are arriving well within the device's latency setting.
An amber light indicates that audio packets for one or more channels are arriving at or near
the limit of the device's latency setting. You may need to increase the device's latency or
reconfigure the network to prevent audio glitches due to packet loss from late-arriving audio
packets.
A red light indicates that one or more audio packets have arrived outside the device's latency
setting. This will result in audio glitches. The device's latency setting should be increased, or the
network reconfigured (for example, by reducing the number of network nodes in between the