12
transmitter and the receiver).
A grey light indicates that the device is not currently subscribed.
Packet Errors
A red light in the Packet Errors column indicates that one or more media packets have been corrupted in
between the switch and the receiver. This is usually due to a faulty Ethernet cable.
Use the
Clear Counters
button in the Device View > Status tab to clear the packet errors history for a
device.
Device View
The Device View is used to view and modify detailed information and settings for a specific device. Device view
can be activated by double-clicking a device name in any of the Network View tabs (except Events), or by
selecting Device View from the Device menu (Ctrl + D, or C D) in the Network View window. The
Device View opens in a new window. Multiple device views can be open simultaneously.
The Device View displays some or all the following tabs, allowing you to see different information relating to a
specific Dante device:
■
Receive: Display and configure
device’s
receive (Rx) channels
■
Transmit: Display and configure
device’s
transmit (Tx) channels including multicast
■
Status: Device software, clock, and network status information
■
Latency: View latency histograms (supported devices only)
■
Device Config: Rename device, change sample rate, and set other attributes (as relevant to device
type)
■
Video Config: Display certain video configuration parameters and information of the Bolin PTZ
camera and decoder
■
Serial Config: Display important serial control settings and parameters
■
Network Config: View and edit network configuration