23
The purpose of this tab is for the user to make certain convenient changes and obtain information from the Dante
Controller regarding Bolin Dante AV devices.
WARNING:
Changing settings using the Video Config tab will cause the screen to be disconnected and fade to black while the change
takes place. The video should restore itself after the change has been applied without needing user intervention.
On the TX end (the camera end) the user can adjust the following:
•
Video Resolution: For the Bolin PTZ camera, this option is set to
Auto,
o
The video resolution will be determined automatically by
EDID system on the decoder side. It takes the highest
resolution that the display supports.
o
Or it will automatically take the video format that is selected
vis OSD menu on the camera side .
•
To change the resolution for the Dante AV IP streaming, you can use
the drop-down resolution menu to select one you need, then click
Save. The camera will take the video resolution that you have
selected and the video resolution will be shown on decoder display.
•
You can select Color Space and Bit Depth as well using the drop-
down menu.
•
Resolution match:
o
Changing video resolution via Dante Controller
video tab will change the video resolution on the
camera side.
o
Changing video resolution via camera OSD menu
on the camera side will not change the video
resolution on Dante Controller side.
o
If you change the video resolution on the camera
side after the video resolution is selected via
Dante Controller, information “Video format
mismatch from source” will be shown. Means that
the video format on the camera is not the same as the format selected on Dante Controller
