Bolin Technology D Series, User Manual

Page: 37 / 47

37
Storing the Camera Settings in Memory
— the Presetting Feature
Memory (Preset)
Using the preset function, 9 sets of camera shooting conditions can be stored and recalled. 9 sets of camera
shooting conditions can be stored and recalled by using remote controller. Up to 128 presets via protocol
programming.
This function allows you to achieve the desired status
instantly, without needing to adjust the following items each
time.
•
Pan/Tilt Position
•
Zoom Position
•
Focus Auto/Manual
•
Focus Position
•
AE Mode
•
Shutter control parameters
•
Bright Control
•
Iris control parameters
•
Gain control parameters
•
Exposure Compensation On/Off
•
Exposure Level
•
Backlight Compensation On/Off
•
White Balance Mode
•
R/B Gain
•
Aperture Control
•
WD Parameter
The settings stored using this function are recalled when the
power is turned on.
1. Press the PAN-TILT RESET button to delete reset the pan/ tilt
position.
2. Adjust the position, zooming, focus, and backlighting of the
camera.
While holding down the PRESET button, press any of the POSITION
buttons, 1 to 9, in which you want to store the settings.
Recalling the stored settings
Press any of the POSITION buttons, [1] to [9], in which you have stored the settings.
Cancelling the preset memory
While holding down the RESET button, press the POSITION button from
which you want to cancel the settings.
Notes
•
When the power is turned on, the camera starts with the settings
stored in POSITION 1.
•
If you want to retain the previous pan and tilt positions, etc. store
those settings to POSITION 1 before the power is turned off.
•
When you are storing or cancelling the settings in one POSITION, you cannot call up, store, or cancel
the settings in another POSITION.
•
When the menu is displayed on the screen, you cannot perform the operation for storing, recalling, or
cancelling the setting. Be sure to return to the normal display before starting these operations.