Bolin Technology D Series, User Manual

Page: 32 / 47

32
VISCA controller.
DISPLAY INFO
When this item is set to ON, the message of the camera configuration appears for about 10 seconds on the
screen, after the camera is powered on or rebooted
PRESET SETTINGS
Used to set functions related to presets, including Preset Memory and Motionless Preset
•
PRESET MEMORY:
o
This feature allows you to save the image parameter
to PRESET memory, turn it on to save most image
parameters like picture, white balance, exposure,
focus mode, zoom positions when you call the
preset.
o
Set to OFF to disable saving the image parameters
to presets, make the preset only include pan/tilt/zoom actions.
•
MOTIONLESS PRESET:
o
When motionless preset is ON, video image will not be shown during the transition to the
designated preset location.
o
Set to OFF to disable Motionless preset, back to normal running preset action.
COLOR SPACE
User can select color space of the camera output signal based on
the color space of the back-end display or video capture device.
•
User can select YUV or RGB format
AUDIO
This item is set to OFF by default, user can set it to ON to enable
camera to capture audio signal if there
’s audio source connected to
the camera
’s rear panel 3.5mm audio input port.
•
AUDIO: OFF by default, user can set it to ON to extend the
audio setting menu
•
INPUT TYPE: To select the audio input type, options are
LINE and MIC
o
LINE: To enable the camera to process audio
through Line in and capture the audio source
o
MIC: To enable the camera to process audio through
microphone and capture the Mic audio source
•
VOLUME LEVEL: To adjust the audio gain value.
o
LINE audio gain value can be adjusted from the following: -34.5dB to 33dB
o
MIC audio gain value can be adjusted from the following: 6dB, 9dB, 12dB, 15dB, 20dB, 40dB
•
PLUGIN POWER: Available when Input Type is set to MIC
o
OFF: Disable plugin power for the connected microphone. In this case, the microphone needs
to be powered by external power adapter.
o
ON: Enable plugin power for the connected microphone, and the power supply voltage is 2.5V
FACTORY RESET
You can select this item to set camera back to Factory Default setting by pressing HOME button to confirm the
action. All data of the camera that have been set will be deleted.
TALLY MODE
When the tally mode is set to ON, the tally light on the camera will be turned on.
If you connect the camera to Bolin keyboard controller, you can set the GPI I/O to Output mode in Keyboard
Setting, allowing tally control via the keyboard directly
RELOAD PRESET 1:
When this item is set to ON, preset 1 is set to HOME position. The camera goes to HOME position when it is
powered on or reset.
VIDEO FORMAT:
This Video Format selection will determine the video format of HDMI output.
You can change the video format here.
•
Select the Video Format row
, press “←” button to choose the video format you want to set to
•
Click HOME button to confirm the change or can cancel by pressing the MENU button.
•
Note: The lens will be initialized by itself, the new video format will be activated.
PRESET MEMORY
ON
MOTIONLESS PRESET
ON
PRESET SETTINGS
COLOR SPACE YUV/RGB
COLOR SPACE
AUDIO ON
INPUT TYPE LINE
VOLUME LEVEL 0dB
AUDIO
AUDIO ON
INPUT TYPE MIC
VOLUME LEVEL 12dB
PLUGIN POWER OFF
AUDIO