It is divided into four video settings menu, General Settings, encoding settings, sub-stream settings and
video programs.
The MDVR needs settings in order to achieve the best video, video will start work after host start up in default,
but in order for better video function of host, the relevant parameters can be modified. Video setting menu
shown in Figure 4-13
Description
1.Selectable video format PAL / NTSC
2.Selectable video mode: startup recording / alarm
recording and timer recording
3.Sectional Time options 15/30/45/60, that is to say, video
file will be packaged per such period of time, due to the
limitation of the SD card writing speed and to make the
packaging of the video file segments faster, it is
recommended to choose 15/30 minutes.
4.Automatically overwrite can be selectively turned on / off,
when it is turned on, video file will automatically overwrite
the earliest video when SD card is full.
5.Alarm pre-recorded time: when the alarm occurs, it will
package the videos happened before alarm occurs to alarm
recording (range 0-60S)
6.The alarm recording Delay: when the alarm stops, it will package the videos happened after alarm stops to
alarm recording (delay range 30-900S) to form an alarm recording file.
7.Alarm output time: the continual alarm output time after the alarm occurs and connects to external alarm
device: output time(5S - 255S)
8.Protection time of alarm recording, that is, storage time for alarm recording in SD card, in the protective
period of time, even if the SD card is full alarm recording will not be overwritten, and the drop-down menu
optional 1/3/5/7/10 days, it is recommended to set 1 or 3 days according to the current capacity of the SD card.
system encoded Recording time etc
TV System,Record Delay,Alarm Delay
All Channel Encode Setup