Record file search,playback
Instructions:
Insert WIFI antenna to corresponding interface behind the host, edit the following information on WIFI setting
interface as shown in Figure 4-48:
1. Set WIFI enabled and encrypted to be open. Authentication modes includ WPA, WPA-PSK, WPA2-P
SKOPEN and SHARED, with encryption type TKIP and AES; authentication mode is not in force yet, so only
by selecting OPEN status (that
s, open status does not require authentication) the WIFI can carry out normal
communication, select the type of WEP encryption, which of course should be consistent with the encryption
type of your router, as shown in Figure 4-48;
2.Enter separately the SSID and password (name and password of wireless network), and set up IP, mask
and gateway, this setting needs to be in the same network segment as your current wireless LAN network
settings. SSID / password can be set by pressing "ENTER", IP, mask and the gateway can be set by pressing
the number keys;
3.View system information, shown in Figure 4-46, if the WIFI signal value is greater than-60db, then it
means a relatively good WIFI signal.
4.If you want to report to the gServer server, please input gServer central IP and port number into the
central IP field shown in Figure 4-11.
The functionality of WIFI depends on the model, and this feature is optional, therefore,
the mode to realize WIFI menu function may not be the same, which is subject to the
actual development of the function.
Enter into the video search menu, play back video files by searching for different video types (all
types, conventional types, alarm types) and different storage media (SD1 and SD2). Specific files can
be searched by date and time, when there is vedio files some day, the corresponding date will be
displayed in green, as shown in Figure 4-50; searching results will be displayed after searching as
shown in Figure 4-51.
Note
