4.
3-2
Vehicle settings
4:When the GPS time proofreading opens, in the default time
zone, such as the default GM +08:00 time zone, system will
automatically proofread time by GPS when it reaches time
proofreading point.
5:Switching machine: the ignition mode / timer mode, the
ignition mode is that MDVR began to start up after vehicle
starts its key, this operation is recommended as the preferred
default starting-up. timer mode is the operating mode of startup
and shutdown at the point of time set by the user.
6:Off delay: Either the ignition mode or timer mode, as long
as the wiring is correct, you can set the delay off of host,
delay off time range is from 5 minutes to 180 minutes, MDVR
will continue to do the video recording by the delay off set
time before shutting down when the vehicle is turned off.
Network setup interface is shown in Figure 4-11
1.IP address Mask Gateway etc are LAN network setting after
plugging in the network cable, there is no need to input if you do
not use them.
2.Server
s IP address is the one MDVR host using 3G to report to
gServer platform central server, which generally is the public fixed
IP, the IP address must be set up, or else 3G host cannot report to
platform; this requires our host can support 3G; this menu will no
need of setting if the host is without 3G module.
3.Control port: set to be the port number of the gateway server,
generally the default is set to "6608" port
assword setup interface is shown in Figure 4-10
1.Password effective settings to select on or off
2.Only administrators have permission to modify the passwords
of users and administrators. Ordinary user s password is initially
set as 000000, and the initial password for administrator is 111111.
When password change finishes and exit menu, it will need to use
new password to log in again, the login screen shown in Figure 4-3.
General settings menu interface
1:Device No.: user sets a unique device number to each device,
which will automatically display on the right of the number input
box. The device number is 5 digits & characters, digits are
effective. If it is 3G device, it is strongly suggested to set a unique
device number, because a server requires only one device number.
2:Vehicle identification number: this number is recommended
to be set during installation, because the vehicle identification
number will be superimposed onto the video during video
encoding to be strong video evidence. If you do not enter the
vehicle identification number, then it will show 00000 in
default. For detailed input method, please refer to Chapter 3.2
3:Line number, company name, the name of the driver can
fill out as demand