Select the motion detection under alarm settings module to enter the motion detection settings interface,
as shown in Figure 4-29
Within the area selected by the user, the system will release alarm information after detection when there
are moving objects. The motion detection alarm events can be searched in the log with the name CHL MD Alarm,
the user can review these logs under the System Tools - log search. When the channel acts as motion
detection, the video of the channel will be packaged into alarm recording, which users can search and play
back the videos during that period of time.
Motion Detection Settings
Motion detection area setup steps
Select the "Settings" and press ENTER on the remote control to enter the motion detection area setup
interface, as shown in Figure 4-30. Firstly: select the first box (yellow), which will turn blue after pressing
"ENTER", secondly: select the second box and press "ENTER", the rectangular area which takes the two
box as diagonal is selected; Thirdly: "RETURN" to the higher level interface and save.
Sensitivity is divided into three levels-- low, medium, and high. Under high sensitivity state, it is capable
of sensing changes in light, while under the low sensitivity state, only can detect the moving objects;
customers can set the sensitivity level according to the actual situation.
It is divided into four menus under System Tools: configuration management,
device formatting, system upgrades, log search
BE SURE FOR FOTMAT?
O K
CANCEL
Formatting is successful, the system will restart
F O R M A T
FORMAT SD CARD
SELECT SD
Config Manage,Device Format,Upgrade etc.
Storage Device Format
CAUTION
