Maintenance
HEPA Filter Replacement
To replace the HEPA filter please follow the procedure
below.
1.
Isolate the electrical supply to the extractor
2.
Undo the 2 latches on the front of the extractor to
open the front door.
3.
Undo the 2 screws that hold the filter cage in place.
4.
Remove the filter from its holder.
5.
Once removed it is recommended that the filters
are bagged and sealed
6.
Install the new filter and fit the filter cage.
7.
Close the door and secure the 2 latches
8.
Reconnect the mains supply to the unit.
02
6
