Installation
During the machining processes which remove material,
dust is usually generated as a by-product. This dust needs to
be removed in order to prevent interference with the
performance of the machine and also to protect the health
of the operator. The Dental Pro range of units has been
developed to provide effective removal of swarf and smaller
particulates created during processes such as routing,
mechanical engraving, grinding and lathing. Dental Pro
units are compact and portable. They are of robust design,
and feature ease of use with minimal maintenance and long
life.
Exposure to airborne contaminants at work, such as
inhalable
and respirable dust particles, can put people’s
health at risk. Health and safety regulations require
employers to control exposure to hazardous substances in
order to prevent ill health. The use of a suitable extraction
system will enable you to conform to the Health and Safety
regulations and protect the health employees and others.
This unit has been designed to remove and filter fume
containing potentially hazardous particulate generated
during manufacturing processes. Such hazardous
substances are captured within the filtration system after
which the cleaned air is returned to the workplace.
General Guidelines for a successful installation
•
Keep duct run length to a minimum
•
Avoid sharp bends / turns in the ductwork
•
Avoid multiple bends / turns in the ductwork
•
Use a larger diameter duct where able
•
Position the capture device as close as possible to
the marking point
Cabinets
Cabinets normally have a 75mm 0r 100mm spigot for fume
extraction. For best performance use the same diameter
hose as the spigot and reduce at the extractor end if
necessary.
Keep the hose run as short as possible.
01
4
