Replacement Parts
Consumable Spares
The system contains a pre filter and a HEPA filter. These
should be replaced when the RED LED is flashing (see
section
6
for replacing the filters)
To maintain performance it is important that the filters are
replaced with identical BOFA filters. To re-order please refer
to stickers on filters in your unit.
Maintenance Protocol
Filter change information may also be recorded in the table
below.
Unit Serial Number:
Pre filter
HEPA filter
Date
Engineer
Date
Engineer
Filter disposal
The filters are manufactured from non-toxic materials.
Filters are not re-usable, cleaning used filters is not
recommended. The method of disposal of the used filters
depends on the material deposited on them.
For your guidance
Deposit
EWC
Listing*
Comment
Non
Hazardous
15 02 03
Can be disposed of as non-
hazardous waste.
Hazardous 15 02 02M
The type of hazard needs to
be identified and the
associated risks defined.
The thresholds for these
risks can then be compared
with the amount of material
in the filters to see if they
fall into the hazardous
category, if so, the filters
will need to be disposed of
in line with the
local/national regulations.
*European Waste Catalogue
01
7
