5
ASSEMBLY INSTRUCTION
Step 1
Attach the two Roller Wheels (3) to the Main Frame (1). Secure each Roller Wheel (3) with
one Allen Bolt (4) and one Nylon Nut (2) which are pre-assembled on the Main Frame.
Attach the computer support tube (20) to the main frame(1) and fasten it with two sets of
Washer
(43) and ellen bolt (19). Take the computer wire (23) from the top bracket of the
support tube (20) and connect it with the computer (24).
Attach the computer to the computer support tube(20) and fasten it with four screws (25)
which are pre-assembled on the back of the computer(24).
2
3
4
3
4
2
1
25
24
20
23
43
43
19
19
Step 2
Insert the slide rail (45) onto the
‘
U
’
type connect tube the of main frame (1), fasten with one
axle for the slide rail (41), two sets of ellen bolts (34), spring washers (37) and flat washers
(38). Then insert the ball pin (35).
1 34
38
37
41
34
37
38
35
45
STEP: 2
¦ µ
8*
¦ µ
25mm
38
2X
M8*20mm
34
2X
37
¦ µ
8mm
2X
41
¦ µ
16*86mm
1X
6mm
M8*35mm
4
2X
STEP: 1
M8
2
2X
¦ µ
8*
¦ µ
17mm
43
2X
M8*16mm
19
1X
6mm
8
ASSEMBLY
INSTRUCTION