BodyCraft F738, Owner'S Manual

Page: 22 / 84

Product Assembly - RFT - STEP 2c
22
S
TEP 2c:
Installation of the Front Uprights
(F730 & F738 Parts)
Attach the Upright, Front, 78-1/2“, taller ones (4) to the
Frame, Bottom Right - Assembly (3-ASM) and the Pulley
Connector Plate, Bottom, Right (212) using:
3/4 SOCKET &
6” EXTENSION
Recommended Tools
3/4 WRENCH
Please Hand Tighten All Bolts Until STEP 9
NOTE: If you are installing the F737 Landmine Option
(600-ASM), change to the following hardware:
● Two Bolts, Hex 1/2" x 4-1/2” (610)
● Do not use both the shorter #257 bolts
● Two BOLTS, Hex 1/2" x 4-1/4” (257)
● Four WASHERS, Flat Large 1/2" (246)
● Two NUTS, Hex Lock 1/2" (268)