BodyCraft F738, Owner'S Manual

Page: 40 / 84

Product Assembly - RFT - STEP 7c
40
STEP 7c:
Lube all four Guide Rods
Lube at this time only the lower half with 100% pure
Silicone Lube or Teflon PTFE grease.
Top half will be
done later. This potentially keeps lube from not getting on
the installers clothes during the next few assembly steps.
Apply a light layer with a clean rag.
To purchase additional lube:
https://www.bodycraft.com/product/treadlube5pk/
100% COTTON
CLEANING CLOTH
100% PURE SILICONE
LUBE
+
NOTE: Lubing the lower half is a great practice
to do at this point due to:
● Doing this before the weight stack goes
on and blocks the potential “dry” part of
the Guide Rods, ensures they are lubed.
● Ensures that the Weight Plates (234)
internal bushing get a “break-in” lube for
a quiet & longer life operation.
● Ensures the Guide Rods (223) in the
unseen area has protection from future
potential surface rust in the higher
humidity environments.