BodyCraft F738, Owner'S Manual

Page: 6 / 84

Important Notes and Tips:
1. Before assembly, read all instructions thoroughly and preview diagrams to help make the
installation easier.
2. Make sure all parts are accounted for and in proper condition before beginning assembly.
See the parts list.
3. Be cautious not to damage the flooring when assembling. Place a protectant down such as a
rubber mat or shipping blanket.
4. Let plastics and weight stacks acclimate to room temperature before you begin assembly.
5. Two people are recommended for the safe assembly of this equipment.
6. Insert all bolts in the same direction when possible. Do not tighten until instructed.
7. Carefully install plastic caps using a rubber mallet.
8. When measuring bolt lengths, only measure the
shank.
9. When the installation is complete, be sure to
regularly check for rust or damage, and
perform preventative maintenance.
Important Notes, Recommended Tools & Cleaners
TIP ON FRAME ONLY:
THE FOLLOWING IS RECOMMENDED FOR CLEANING:
100% COTTON
CLEANING CLOTHS
(Do Not Use on the Upholstery)
MILD CLEANING
SOLUTION
6
SOCKET SET 3/8 DRIVE & 6” EXT
(Only 9/16 & 3/4 Sockets needed)
OPEN, CLOSED &
ADJUSTABLE WRENCHES
(Only 9/16 & 3/4 is needed)
TORQUE WRENCH
3/8 DRIVE
(w/ 5/32, 3/16 & 3/8 )
THE FOLLOWING TOOLS ARE RECOMMENDED FOR ASSEMBLY:
ALLEN WRENCH SET
(Only 5/32, 3/16 & 3/8
is needed)