body Power BR2998, Owner'S Manual

Page: 11 / 26

BR2998 Page 9
Assembly STEP 3
Slide the Coupler Bar Axle (#13) through the center slot on the
Center Post (#02) and center it so it is evenly distributed on the left/
right sides.
Next, slide one Wavy Washer (#35) on each side then, followed by
corresponding Left/Right Coupler Bar (#05/#06) . Secure each side
with a Big Washer (#30) , a Spring Washer (#33) and a Bolt (#20) .
Hardware Required
#20.Bolt (M8x20 mm)
[2 pieces]
#33.Spring Washer (M8)
[2 pieces]
#35.Wavy Washer (φ19 mm)
[2 pieces]
#30.Big Washer (M8)
[2 pieces]