BR2998
Page 10
Assembly STEP 4
Align and attach the
Pedal Connection Joint (#07)
on the
Right
Pedal Tube (#04)
to the right
Crank (#14)
. Insert a
Pedal Hinge
Bolt (#17)
through a
Wavy Washer (#34)
followed by
Pedal Con-
nection Joint (#07)
and
Right Crank (#14)
.
Screw the
Pedal Hinge Bolt (#17)
tightly into the
Right Crank (#14)
by turning
CLOCKWISE
and then secure it with the
Nylon Nut (#36)
by turning it
COUNTERCLOCKWISE
.
Align and attach the
Right Coupler Bar (#06)
to the
Right Pedal
Tube (#04)
. Secure them together using a
Bolt (#18)
,
Washer (#29)
and a
Nylon Nut (#37)
.
Attach the
Right Pedal (#41)
to the
Right Pedal Tube (#04)
and se-
cure them together using two
Hex Bolts (#24)
, two
Washers (#31)
and two
Nylon Nuts (#38)
.
Repeat this process on the other side with the
Left Pedal Tube (#03)
and
Left Coupler Bar (#05)
.
Hardware Required
#24.Hex Bolt (M8x40 mm)
[4 pieces]
#17. Pedal Hinge Bolt (φ16x1/2"x97 mm)
[2 pieces]
#18.Bolt (M10x68 mm)
[2 pieces]
#29.Washer (M10)
[2 pieces]
#34.Wavy Washer (φ16 mm)
[2 pieces]
#31.Washer (M8)
[4 pieces]
#36.Nylon Nut (1/2")
[2 pieces]
#37.Nylon Nut (M10)
[2 pieces]
#38.Nylon Nut (M8)
[4 pieces]
Summary of Contents for BR2998
