body Power BR2998, Owner'S Manual

Page: 9 / 26

BR2998 Page 7
Assembly STEP 1
NOTE BEFORE STARTING THE ASSEMBLY PROCESS :
To avoid misalignment due to over-tightening, please do not use a
wrench and use only hand-tightening for now to ensure
easy assembly.
Wrench-tightening should be performed after all parts are assembled
to ensure all nuts, bolts, and parts are tightly secured before use.
A.) With the help of an assistant, attach the Front Stabilizer (#11)
to the front bracket of the Main Frame (#01) . Insert two Carriage
Bolts(#16) through the Front Stabilizer (#11) followed by the front
bracket of the Main Frame (#01) . Secure them together using two Arc
Washers (#32) two Spring Washers (#33) and two Cap Nuts (#39) .
B.) Attach the Rear Stabilizer (#12) to the rear bracket of the Main
Frame (#01) . Insert two Carriage Bolts(#16) through the
Rear Stabilizer (#12) followed by the rear bracket of the
Main Frame (#01) .
Secure them together using two Arc Washers (#32) two Spring
Washers (#33) and two Cap Nuts (#39) .
Please note that the Front Stabilizer (#11) has end caps that spin
for ease of relocating the unit. The Rear Stabilizer (#12) has height
adjustable end caps for leveling of the unit.
Hardware Required
A
B
Spinning End Caps
Height Adjustable
End Caps
#16. Carriage Bolt (M8x70 mm)
[4 pieces]
#32.Arc Washer (M8)
[4 pieces]
#33.Spring Washer (M8)
[4 pieces]
#39.Cap Nut (M8)
[4 pieces]