BR2998
Page 19
Safety and Maintenance
•
To reduce speed on the elliptical, you may use the combinations of your feet on the Left/Right Pedal
(#40/#41)
and
your hands on the handlebars
(#9/#10)
to slow down safely and safely apply counter-momentum
•
Wait for the pedals to come to a complete stop
•
Now you may safely dismount the unit.
•
Make sure all nuts, bolts, and screws are tightened prior to use.
•
Be sure that all adjustment locking devices and safety devices are properly engaged prior to use!
•
Never over-tighten the above-mentioned devices and parts to avoid damage to the unit.
•
Check for loose parts and components and make proper adjustments prior to use.
•
Check to see if there are any tears or bends in the welding or metal prior to use. If tears or bends are found,
DO NOT use the unit and contact our CUSTOMER SUPPORT.
•
Extreme care must be taken to not allow your feet, fingers, hair, clothing, and/or any loose items to be snagged into any portion of
the bike when the unit is in motion. Failure to follow these instructions could result in serious injury, including the loss of fingers.
•
Always wait for the pedals and other moving parts (which can gain great momentum during riding) to come to a
complete stop before dismounting the unit to avoid serious injury.
NOTE :
Always wait for the pedals and/or any other moving parts (which can gain great momentum during exercise) to come to a com-
plete stop before dismounting the unit to avoid serious injury.
NOTE :
To safely move, transport, and/or store the unit, please seek the help of capable assistants (minimum of 2 people).
The unit has integrated spinning End Cap for Front Stabilizer
(#52)
purposely intended to help ease this process.
•
Position one person on each side at the front of the bike (one person on the left, and one on the right).
•
Have each person use both hands to grip the corresponding Pulse Handle Bar
(#8)
(These are the safest areas to avoid injury
during this process.)
•
Have both people simultaneously lift the rear end of the unit, leaning the weight and pressure into the front of the unit and onto the
End Cap for Front Stabilizer
(#52)
to move/transport the unit to the desired area.
•
Please review all safety instructions and warnings in this entire Owner’s Manual, as well as any safety/warning labels affixed to the
product before use.
•
Do not use solvent cleaners. If you are in any doubt, do not use your cleansing product; contact CUSTOMER SUPPORT.
•
The specific parts on your unit which may see possible signs of wear after prolonged use are listed as follows (please check these
parts before each use): Left Right Pedal
(#40/41)
.
•
For any replacement warning labels, please contact our CUSTOMER SUPPORT at
1 (888) 266-6789
or
1 (909) 598-9876
, or mail in a written request to:
Body Flex Sports Inc.
21717 Ferrero Parkway
Walnut, CA 91789
More detailed information about how to reach our CUSTOMER SUPPORT may be found on Page 2 of the
Owner’s Manual under the “CUSTOMER SUPPORT” section.
Safety & Warning
How To (Emergency) Stop
How To Move/Transport The Unit
Storage
Maintenance & Care
Summary of Contents for BR2998
