body Power BR2998, Owner'S Manual

Page: 10 / 26

BR2998 Page 8
Assembly STEP 2
Remove the pre-assembled parts from the Main Frame (#01) and set
them aside: six Bolts (#21) , six Spring Washers (#33) and six Arc
Washers (#32) . With the help of an assistant, connect the Monitor
Wire (Upper) (#58) to Monitor Wire (Lower) (#59) as shown in detail
diagram below.
Attach the Center Post (#02) to the Main Frame (#01) and secure
using six Bolts (#21) , six Spring Washers (#33) and six Arc Wash-
ers (#32) that were previously removed.
Hardware Required
#32.Arc Washer (M8)
[6 pieces]
#33.Spring Washer (M8)
[6 pieces]
#21.Bolt (M8x15 mm)
[6 pieces]