21
21
21
21
21
P
P
P
P
Par
ar
ar
ar
art III:
t III:
t III:
t III:
t III: The 10Base-T Ether
The 10Base-T Ether
The 10Base-T Ether
The 10Base-T Ether
The 10Base-T Ethernet Netw
net Netw
net Netw
net Netw
net Networ
or
or
or
ork Car
k Car
k Car
k Car
k Card
d
d
d
d
Section One: Installa
Section One: Installa
Section One: Installa
Section One: Installa
Section One: Installation
tion
tion
tion
tion
The 10Base-T Ethernet Network Card is compatible with
network hardware which complies with IEEE Ethernet 802.3
standards. The card offers a twisted-pair connector, plus a BNC
connector. The network card is compatible with existing
NE2000 drivers shipped with Novell and other operating
systems. In addition, drivers are also provided for full-duplex
operation when network switches are used. Throughput may
then reach as high as 20Mb/s.
PNP OR JUMPERLESS MODE
PNP OR JUMPERLESS MODE
PNP OR JUMPERLESS MODE
PNP OR JUMPERLESS MODE
PNP OR JUMPERLESS MODE
This selects the operating mode of the 10Base-T Network Card:
PNP (Plug and Play) or Jumperless (configured by
BENCFG.EXE).
1. If either your BIOS is Plug and Play
If either your BIOS is Plug and Play
If either your BIOS is Plug and Play
If either your BIOS is Plug and Play
If either your BIOS is Plug and Play, or you have W
, or you have W
, or you have W
, or you have W
, or you have Windows
indows
indows
indows
indows
95
95
95
95
95
, do not install the 10Base-T Network Card
10Base-T Network Card
10Base-T Network Card
10Base-T Network Card
10Base-T Network Card
Configuration
Utility. Leave the card in the default Plug and Play mode.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE:
If you have a Plug and Play system
If you have a Plug and Play system
If you have a Plug and Play system
If you have a Plug and Play system
If you have a Plug and Play system
, but do not have
Windows 95, you will need to know the system resources
assigned to the card. Run a utility such as Isolate to provide
this information.
2. If you do NOT have W
If you do NOT have W
If you do NOT have W
If you do NOT have W
If you do NOT have Windows 95, and your BIOS is NOT
indows 95, and your BIOS is NOT
indows 95, and your BIOS is NOT
indows 95, and your BIOS is NOT
indows 95, and your BIOS is NOT
Plug and Play
Plug and Play
Plug and Play
Plug and Play
Plug and Play
, then you must install the 10Base-T Network
10Base-T Network
10Base-T Network
10Base-T Network
10Base-T Network
Card
Card
Card
Card
Card
Configuration Utility (see
Part III, Section Two
). Run
BENCFG and set the mode to “jumperless”. Press F10
F10
F10
F10
F10
to save
changes made in BENCFG.
Installation
Installation
Installation
Installation
Installation
P
a
rt
III:
The 10Base-T
Netw
ork Car
d
9370.p65
1/28/99, 2:57 PM
21
Summary of Contents for NET-8
Page 1: ...8 PORT ETHERNET NETWORK BOCANET 8ETHERNETKIT...
Page 55: ...55 55 55 55 55...