Boca NET-8, Installation Manual, Page: 22 / 56

22 22
22 22
22
BOCA NET BOCA NET BOCA NET BOCA NET BOCA NET-8 Ethernet Kit -8 Ethernet Kit -8 Ethernet Kit -8 Ethernet Kit -8 Ethernet Kit
1.1 Inser 1.1 Inser
1.1 Inser 1.1 Inser
1.1 Inserting the ting the
ting the ting the
ting the Ada Ada
Ada Ada
Adapter pter
pter pter
pter
Remo Remo
Remo Remo
Removing the System Co ving the System Co
ving the System Co ving the System Co
ving the System Cov v
v v
ver er
er er
er
These instructions assume an IBM-style or compatible machine.
1. Power-down your system and remove the power cord.
2. Use a screwdriver to remove the screws which hold the cover
in place. Obviously, locations and types of screws as well as
type of case cover will vary based on your particular system.
Refer to your computer system documentation for assistance.
3. Carefully remove the
cover from the computer.
Be careful not to let the
cover catch on internal
cables to disk drives,
controllers, or the power
supply.
Inser Inser
Inser Inser
Inserting the Netw ting the Netw
ting the Netw ting the Netw
ting the Networ or
or or
ork Car k Car
k Car k Car
k Card d
d d
d
4. Select an empty 16-bit slot and remove the screw and metal
plate that covers the external access to the slot you have
selected.
5. Insert the adapter in the slot you have selected so that the
edge connectors on the bottom of the board mate with the
slot on the motherboard. Press down firmly on the board and
secure it with the screw you removed in step 4.
9370.p65 1/28/99, 2:57 PM 22