Boca NET-8, Installation Manual, Page: 25 / 56

25 25
25 25
25
.
1.2 1.2
1.2 1.2
1.2 Ada Ada
Ada Ada
Adapter Conf pter Conf
pter Conf pter Conf
pter Configura igura
igura igura
iguration tion
tion tion
tion
Loading a Single Boar Loading a Single Boar
Loading a Single Boar Loading a Single Boar
Loading a Single Board d
d d
d
The 10Base-T Network Card is a software-configurable
Ethernet adapter. In order to change parameters, run the
configuration utility, BENCFG.EXE
BENCFG.EXE
BENCFG.EXE BENCFG.EXE BENCFG.EXE , to specify the following
options:
I/O Base Address, Interrupt Number I/O Base Address, Interrupt Number
I/O Base Address, Interrupt Number I/O Base Address, Interrupt Number I/O Base Address, Interrupt Number, Run Diagnostics, and
, Run Diagnostics, and
, Run Diagnostics, and , Run Diagnostics, and , Run Diagnostics, and
Boot ROM Address. Boot ROM Address.
Boot ROM Address. Boot ROM Address.
Boot ROM Address.
Loading Multiple Boar Loading Multiple Boar
Loading Multiple Boar Loading Multiple Boar Loading Multiple Boards
ds
ds ds ds
To load more than one 10Base-T Network Card in your
machine, you must configure each one separately. Configure
each board to a different interrupt and I/O base address. Insert
one card and run BENCFG.EXE. When all cards have been
correctly configured, power down and re-insert all adapters.
The network driver must be loaded again for each new adapter
board installed in the system. For example, to load three
boards in a NetWare server environment, the following must
be entered.
For first adapter board: LOAD NE2000.LAN int=X1 Port=Y1
For second adapter board: LOAD NE2000.LAN int=X2 Port=Y2
For third adapter board: LOAD NE2000.LAN
int=X3 Port=Y3
Installation Installation
Installation Installation
Installation
9370.p65 1/28/99, 2:57 PM 25