Boca NET-8, Installation Manual

Page: 49 / 56

49 49
49 49
49
Installing the NDIS Boot R Installing the NDIS Boot R Installing the NDIS Boot R Installing the NDIS Boot R Installing the NDIS Boot ROM OM OM OM OM
1. Obtain a boot ROM.
2. Put the Boot ROM in the 28-pin
socket. Make sure you line up the
notch on the Boot ROM with the
notch on the socket.
3. To enable the Boot ROM, run the
BENCFG utility. Select Mode
Settings, then Boot ROM Enable.
4. The Boot ROM will work only with the following three
configurations:
I/O INTERRUPT BOOT ROM
ADDRESS
CONFIG.1 300h 3 C800h
CONFIG.2 320h 5 CC00h
CONFIG.3 340h 4 D000h
5. Follow the LAN Manager server setup procedure for starting
remote booting services on the LAN Manager server. Refer to
the LAN Manager documentation.
6. Remove any boot drives from the workstation (A:, C:) and re-
boot the system.
Installing Boot R Installing Boot R
Installing Boot R Installing Boot R
Installing Boot ROMs OMs
OMs OMs
OMs
U3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
12
12
12
12
12
12
9370.p65 1/28/99, 2:57 PM 49