52
On-Line
EXPRESS
Command
Description
AT\ (back slash) Commands
AT\B
Transmit Break. Sends a break to the remote modem.
It is equivalent to using the <BREAK> key on your
computer. This command can be used if your keyboard
does not have a <BREAK> key.
AT\B0-9 BREAK length in 100 ms.
AT\G
Set Modem Port Flow Control (only in Normal Mode).
Selects the modem’s DCE or port flow control. If your
modem receives data from the remote modem faster
than it can be processed, enabling port flow control
allows the modem to handle the data efficiently.
AT\G0
Disables port flow control.
AT\J
Constant DTE Speed Option.
AT\J0
DCE and DTE rates are independent.
AT\K
Set Break Control. Selects the way in which the modem
handles a break signal. The modem can handle a break
signal in one of three ways: expedited destructive,
expedited, or queued break.
(In on-line data mode with V.42 protocol or normal mode, then break
signal to DTE through RS-232).
0, 2, 4:
Enter on-line command mode but do not send break to the
remote modem.
Summary of Contents for FDSP34AI
Page 1: ...1 V 34 PRODUCT CODE MV 34AI FDSP34AI...
Page 2: ...2 On Line EXPRESS...
Page 67: ...67...
Page 68: ...68 On Line EXPRESS Manual Part No 9484 Rev 2 0...