44
Boca WinStorm 56K
3
CONNECT <text> result code
is given upon entering online
data state. Dial tone detection
is disabled, and busy
detection is enabled.
4
CONNECT <text> result code
is given upon entering online
data state. Dial tone and busy
detection are both enabled.
(Default.)
Result Codes
OK
<value> = 0 to 4.
ERROR
Otherwise.
&C - RLSD Behavior
This parameter determines how the state of the Received Line
Signal Detector (RLSD) output relates to the detection of received
line signal from the distant end. Changing the parameter will take
effect immediately in both the command and online command
states. In &C1 mode of operation, RLSD is not turned off until all
data previously received from the remote modem is delivered to the
local DTE. However, such buffered data will be discarded and RLSD
will be turned off if the DTE turns off DTR (if &D1 or &D2 is set).
Syntax
&C[<value>]
<value> = 0 or 1.
Defined Values
<value>
Decimal number corresponding to the
selected option.
0
RLSD is always ON.
1
RLSD follows the state of the
carrier. (Default.)
Result Code
OK
<value> = 0 or 1
ERROR
Otherwise.
manual2.p65
5/4/98, 12:37 PM
44
