15
the phone into the jack either labeled PHONE or marked with
the symbol (
) on the back of the modem (not supported in
international settings). See illustration below. Note: A telephone is
not necessary for the proper operation of this product.
7. Replace the system cover and reconnect any detached devices
and power cords. Now, you may use your stereo/mono cable to
attach to other devices (if supported by your modem) as
explained in step 8 on the next page, or power up your
computer. If you are running Windows 95, the modem should
be recognized at power-up.
Installation
REAR OF
SYSTEM
MODEM
WALL JACK
PHONE
(speakerphone version
shown here)
manual2.p65
5/4/98, 12:37 PM
15
