43
0
Enables short-form (terse)
result codes. Line feed is not
issued before a short-form
result code.
1
Enables long-form (verbose)
result codes. (Default.)
Result Codes
OK
<value> = 0 or 1.
ERROR
Otherwise.
X - Extended Result Codes
This command selects which subset of the result messages will be
used by the modem to inform the DTE of the results of commands.
Blind dialing is enabled or disabled by country parameters. If the
user wishes to enforce dial tone detection, a “W” can be placed in
the dial string (see D command). Note that the information below is
based upon the default implementation of the X results table.
Syntax
X[<value>]
Defined Values
<value>
Decimal number corresponding to the
selected option.
0
CONNECT result code is
given upon entering online
data state. Dial tone and busy
detection are disabled.
1
CONNECT <text> result code
is given upon entering online
data state. Dial tone and busy
detection are disabled.
2
CONNECT <text> result code
is given upon entering online
data state. Dial tone detection
is enabled, and busy
detection is disabled.
AT Command Reference
manual2.p65
5/4/98, 12:37 PM
43
