65
Reporting Supported Range of Parameter Values
Command:
+MR=?
Response:
+MR: (<value>range)
Example:
+MR: (0,1)
The format of this information text is:
+MCR: Report Syntax
Response:
+MCR: <carrier>
<carrier>
Alphanumeric code corresponding to the
reported carrier. Defined values are:
B103
For Bell 103
B212
For Bell 212
V21
For V.21
V22
For V.22
V22B
For V.22bis
V23C
For V.23
V32
For V.32
V32B
For V.32bis
V34
For V.34
K56FLEX
For K56flex
+MRR: Report Syntax
Response:
+MRR: <tx_rate>,<rx_rate>
<tx_rate>
Decimal transmit rate in bits/s.
<rx_rate>
Decimal receive rate in bits/s.
Example:
+MRR: 28600, 48000
+ER - Error Control Reporting
This extended-format numeric parameter controls whether or not
the extended-format “+ER: “ intermediate result code is transmitted
from the modem to the DTE.
+ER=[<value>]
Syntax
+ER=[<value>]
AT Command Reference
manual2.p65
5/4/98, 12:38 PM
65
