31
Regulatory Statements
CAUTION Users should not attempt to make such connections
themselves, but should contact the appropriate electric inspection
authority or electrician, as appropriate.
The Load Number (LN) assigned to each terminal device denotes the
percentage of the total load to be connected to a telephone loop which is
used by the device to prevent overloading. The termination on a loop
may consist of any combination of devices subject only to the
requirement that the total of the load numbers of all the devices does not
exceed 100. The Load number appears on the underside of the modem.
To be installed in UL-listed and CSA-certified computers with instructions on
how to add/remove expansion cards
.
The RAL number of this equipment is 0.7. This number denotes the number of
items that may be attached to a telephone line. The sum of all the items
connected to a line should not exceeed a sum of 5.
This device is not intended to be used in parallel with other devices. The
operation of this equipment on the same lines as telephones or other equipment
with audible warning devices or automatic ring detectors may give rise to bell
tinkle or noise and may cause trupping of the ring detector. The user should not
report such occurrences as faults.
When relocating the equipment, always disconnect the telecomm line connection
before the power, and reconnect the power first.
NOTE THAT FAILURE TO MEET THE ABOVE REQUIREMENTS MAY
NEGATE THE USER RIGHTS UNDER THE TELECOMM TERMS OF SERVICE
manual2.p65
5/4/98, 12:37 PM
31
