28
Operator’s Manual Simple AFG Application
Berkeley Nucleonics Corporation
[email protected] | www.berkeleynucleonics.com
2955 Kerner Blvd, San Rafael, CA 94901 | 800-234-7858
Rev 1.1
When you select a parameter on the user interface, if you press a Unit Measure Range button it will
automatically update the available range allowed for that parameter.
Unit Measure Range Button
Unit Measure Range
T/p
Tera / pico
G/n
Giga / nano
M/u
Mega / micro
k/m
kilo / milli
For example if you select the Frequency parameter and you press k/m the unit measure range will be
kHz, if you press M/u it will be MHz, if you press G/n it will be GHz, if you press T/p nothing will happen
because that range is not available for the selected parameter.
If both the two unit of measure of a Unit Measure Range button are available for the selected
parameter (i.e. Mega and Micro), if you press the range button
M/u
, the range will switch accordingly
between Mega and Micro.
Rear Panel Model 685-2C
The callouts on this image gives the description of the corresponding connectors:
1 Digital Output Connector: Pod A
•
4 USB 3.0 ports
•
2 Gigabit LAN port
•
3 Audio IN/OUT
•
1 HDMI 1.4 port
•
1 VGA port
•
1 DVI-D port
•
1 Display 1.2 port
•
1 PS/2 Mouse &
Keyboard ports
•
1 COM port
2 Slots for
Removable SSD
•
1 Ref Clk In: 5 to 200 MHz
•
1 10_MHz (100MHz Optional) Ref Clock Output
•
1 External Modulation Input
•
1 External Clock Input
•
1 Sync Clock Output
•
1 Sync OUT + 1 Sync IN Connectors
